Skip to content
Design guide

Get a great print first time

Practical tips for preparing your 3D file so it prints cleanly, fits properly and costs less.

1. Prepare your file

Export your model as STL or OBJ. Make sure it is a single, closed ("watertight") solid with no holes, inverted faces or overlapping shells. Most CAD and slicer tools have a repair or check function; if you are unsure, upload it anyway and we will review it before printing.

Units: STL files carry no units. We assume millimetres. If your model looks tiny or huge in the quote tool, switch the unit to centimetres or inches.

Resolution: a smooth curve needs enough triangles, but extremely dense meshes only make files heavy. 50,000 to 500,000 triangles is plenty for most parts.

Draft0.28 mmStandard0.2 mmFine0.12 mmUltra0.08 mm

Thinner layers give smoother curves, at the cost of longer print time.

2. Design rules of thumb

FeatureRecommendedWhy
Wall thickness1.2 mm or moreThinner walls can be fragile or fail to print.
Smallest detail0.8 mm or moreOur nozzles lay down lines about 0.4 mm wide.
Holes and clearancesAdd 0.2 to 0.4 mmPrinted holes come out slightly small. Add clearance for parts that must fit together.
Moving parts0.4 to 0.5 mm gapSmaller gaps can fuse together during printing.
OverhangsUnder 45° from verticalSteeper overhangs need support, which adds cost and marks the surface.
Embossed text1 mm tall, 2 mm strokesSmaller text becomes unreadable.
Large flat basesAdd small chamfers or rounded edgesSharp bottom edges can lift (warp), especially in ABS.

3. Orientation decides strength

FDM parts are strongest along their layers and weakest between them. Orient the part so that the main load is not trying to pull layers apart. Flat faces that must be smooth or accurate should sit on the build plate.

4. Choosing infill

InfillUse for
10%Display pieces and light decorative parts
20%General prototypes and most everyday parts (default)
40 to 60%Functional parts that need extra strength
100%Small, load-bearing or threaded parts

Walls and top and bottom layers add most of a part's strength. For small parts, extra walls often help more than extra infill.

5. Material quick tips

PLA+ is the easiest and most detailed. PETG is tougher and handles moisture and light heat. ABS tolerates higher temperatures and prints on our enclosed machines. TPU is rubbery; remember soft parts need thicker features to hold their shape.

6. Common problems and fixes

  • Quote shows a warning about the mesh: the model may have holes or flipped faces. Repair it, or upload it and we will check it.
  • Model looks too small or too big: change the unit in the quote tool.
  • Part is larger than the build plate: split it into sections with alignment pins, or contact us and we will help.
  • Thin features missing: thicken anything below about 0.8 mm.

Still unsure? Send us your file and we will advise you before you order.

Ready to bring your design to life?

Upload your 3D file and see your price in seconds. No sign-up needed.

Get instant quote